HVAC Chiller Plant Vs. Rooftop
HVAC staat voor verwarmen, ontluchten en airconditioning. Als het gaat om het koelgedeelte van het systeem, hebben grote commerciële gebouwen twee belangrijke opties - koelmachines en rooftop-units. Er is enige overlap aan de orde, zoals bijvoorbeeld chiller-installaties op daken. Over het algemeen zijn dakunits echter een bredere categorie die verschillende koelmethoden omvat, terwijl koelmachine-installaties een specifiek type koeling zijn dat misschien niet ideaal is voor elk gebouw.
Chiller planten
Chiller-installaties zijn units die gekoeld water gebruiken om grote gebouwen te koelen. Ze hebben ook ventilatoren en ventilatorspoelen, maar water in plaats van koelmiddel is de primaire methode om warmte zo snel mogelijk uit het gebouw te transporteren. Koelinstallaties kunnen op basis van de opstelling luchtgekoeld of watergekoeld zijn. Luchtkoeling heeft de neiging om efficiënter te zijn, maar vereist een grote hoeveelheid ruimte en in sommige situaties kan het efficiënter zijn om waterkoeling te gebruiken.
voordelen
Chiller-installaties kunnen een zeer grote stroomafname zijn, maar als ze op de juiste manier worden geïnstalleerd en onderhouden, kunnen ze bedrijven ook helpen geld te besparen door effectieve airconditioning. Water kost niet zoveel als koelmiddel en is eenvoudig te verpompen en te beheren, waardoor reparaties en componenten minder duur zijn. Ook is een hele koelinstallatie typisch voorverpakt met alle benodigde onderdelen en wordt de installatie vaak meegenomen, waardoor het project zeer eenvoudig is.
Dakunits
Rooftop-HVAC-units zijn eenvoudig luchtbehandelingsunits die zich op de bovenkant van het dak bevinden. Koeltorens bevinden zich mogelijk op bedrijfsdaken voor koelunits, maar zelfs traditionele airconditioners moeten verdampers buiten hebben. Grote banken van verdampers kunnen nodig zijn voor grotere gebouwen. Unitaire apparatuur met kleinere stations is meer geschikt voor lichtere constructies en kleinere gebouwen.
voordelen
Dakunits zijn vaak erg voordelig wanneer een gebouw voor het eerst wordt gebouwd, omdat ze helpen om ruimte te besparen die nodig is op en rond het gebouw voor andere doeleinden. Naast ruimtebesparende overwegingen kunnen daksystemen ook worden geleverd met economizer-secties die energie besparen, evenals geavanceerde modulatiebesturingselementen. Ze kunnen worden gecombineerd met verwarmingssystemen zoals gasverwarming. Dakonderhoud is echter moeilijker en vereist een betrouwbare aannemer om het systeem te reinigen en regelmatig te inspecteren op optimale prestaties.
FAQ - 💬
❓ Can a chiller be on the roof?
👉 Chillers are typically located in the basement or on the roof. Roof top chillers tend to be air cooled where as basement chillers tend to be water cooled. By “cooled” we refer to the method it uses to discard the unwanted heat into the atmosphere which was picked up in the building.
❓ Where should a chiller plant be placed?
👉 Generally, Air cooled chillers are located in mechanical apparatus rooms or in a space of the premises that is close to the mark it is cooling.
❓ What is the difference between HVAC and chiller?
👉 Industrial chillers are built to handle the cooling of various manufacturing processes (brewery cooling, hydroponic cooling, plastics cooling) directly. Conventional HVACs are built to regulate the environmental temperatures within designated spaces.
❓ What is the difference between Air Handling Unit and rooftop unit?
👉 4:158:25working principle Air handling unit, rooftop unit hvac systemStart of suggested clipEnd of suggested clipAnd RT use air handling it's and rooftop units now these two systems both serve a very similarMoreAnd RT use air handling it's and rooftop units now these two systems both serve a very similar purpose. And they can even look fairly alike. Both of these are used to district air around the building.
❓ How does a rooftop chiller work?
👉 Roof top chillers are usually “Air cooled” whereas basement chillers are usually “Water cooled” but they both perform the same function which is to generate cold water for air conditioning by removing the unwanted heat from the building. The only difference is how the chiller discards the unwanted heat.
❓ What is a RTU chiller?
👉 Rooftop units (RTU's) RTU's are also connected to duct work which provides a defined route for the conditioned air to travel along. RTU's typically have their own inbuilt refrigeration system to provide cooling only, but they can also contain a heat pump or a separate heat source such as gas fired heater.
❓ What are the three basic types of chillers?
👉 These chillers are sub-categories of the main 3 types of chillers: reciprocating, rotary screw, and absorption chillers.
❓ How many types of chiller plants are there?
👉 There are two types of chillers: water-cooled and air-cooled.
❓ What is a chiller plant in HVAC?
👉 A chiller (cooling water circulation device) is a general term for a device that controls the temperature by circulating a liquid such as water or heat medium as a cooling liquid whose temperature was adjusted by the refrigerant cycle.
❓ What are the two types of chiller?
👉 The two main types of chillers are vapor compression chillers and vapor absorption chillers.
❓ What is a rooftop HVAC unit?
👉 1:0710:09Rooftop Units explained - RTU working principle hvac
❓ What is the difference between a roof top chiller and basement chiller?
👉 Roof top chillers are usually “Air cooled” whereas basement chillers are usually “Water cooled” but they both perform the same function which is to generate cold water for air conditioning by removing the unwanted heat from the building. The only difference is how the chiller discards the unwanted heat.
❓ What is an air cooled chiller?
👉 Air cooled chillers are typically located on the roof of the building or outside e.g. in the car park. Air cooled chillers also generate chilled water which is pumped around the building to air handling units as well as other apparatus such as fan coil units etc.
❓ Why does a water chiller need a cooling tower?
👉 This type of chiller needs a cooling tower to reject the heat from the building. The chiller produces chilled water and pushes this around the building to Air Handling Units (AHU’s) and Fan Coil Units (FCU’s) etc.
❓ What are the basics of HVAC central cooling plant?
👉 In this article we will be covering this topic to understand the basics of HVAC central plant. The main system components of the central cooling plant are the: The chiller will usually be located either in the basement or on the roof and this depends on what type of chiller is used.