Hoe af te werken met Minwax Antique Oil Finish
Een olie-afwerking kan antieke houten meubels herstellen of oudere houten meubels nieuw leven geven door de natuurlijke glans naar boven te brengen. Minwax is een bedrijf dat beschermende afwerkingen en vlekken verkoopt voor houten meubels en hardhouten vloeren. Minwax Antique Oil Finish is een vlekbestendige beschermende afwerking met een oliebasis. Het wordt gebruikt op afgewerkt of onafgewerkt hout. Voor de juiste toepassing van deze afwerking zijn twee of drie lagen nodig met een doek of
Stap 1
Schuur het meubelstuk totdat het oppervlak overal glad is. Veeg stof af met een doek gedrenkt in minerale alcohol, een hoogwaardig oplosmiddel.
Stap 2
Giet een ruime hoeveelheid Minwax Antique Oil op een doek of borstel en breng het aan in de richting van de houtnerf tot je het hele meubel hebt gecoat.
Stap 3
Wacht vijf tot tien minuten en poets het hout met een schone doek.
Stap 4
Breng een tweede laag Minwax Antique Oil Finish aan 24 uur na de eerste laag en herhaal het polijstproces.
Dingen die je nodig hebt
- Schuurpapier
- Schone doeken
- Minerale geesten
- Penseel (optioneel)
Tips
- Breng voor een superglans een derde laag afwerking aan 24 uur na het aanbrengen van de tweede laag.
- Als u problemen ondervindt bij het polijsten, breng dan onmiddellijk een nieuwe laag aan en probeer opnieuw te polijsten na een wachtperiode van 10 minuten.
waarschuwingen
- Gebruik Minwax Antique Oil Finish niet op vloeren.
- Als u oude verf verwijdert door schrapen, schuren of door een proces dat stof of dampen veroorzaakt, kunt u worden blootgesteld aan schadelijke lood. Gebruik een gasmasker of ander beschermingsmiddel. Neem voor meer informatie contact op met het National Lead Information Center.
FAQ - 💬
❓ How do you use Minwax Antique Oil?
👉 Wipe or brush on a generous coat of Minwax® Antique Oil Finish. Apply in the direction of the wood grain. Let sit on wood for approximately 5-10 minutes, then buff evenly with a clean, lint-free cloth. Wait 24 hours and apply a second coat.
❓ Can you put polyurethane over Minwax Antique Oil Finish?
👉 It usually dries to a glossy finish, so if that's not your desired look, apply another coat of a satin or semi-gloss varnish or polyurethane.
❓ How do you buff Minwax tung oil finish?
👉 0:341:54Tips on how to achieve a hand-rubbed finish with Minwax ...YouTubeStart of suggested clipEnd of suggested clipFor your first coat saturate the wood with oil and give it about five minutes to soak into thoseMoreFor your first coat saturate the wood with oil and give it about five minutes to soak into those empty pores. Before you wipe off the excess oil with a rag. Let.
❓ Is Minwax Antique Oil Finish water resistant?
👉 Minwax Antique Oil is nothing more than and linseed oil/varnish mixture. It is completely compatable with any oil based finish and it can be overcoated with any other finish as long as it has fully dried. Because of the type of finish that it is, it does not have much in the way of water and watervapor protection.
❓ What does antique finish mean?
👉 Antique finish definitions A paint or stain finish applied to an object to give an aged look. Techniques commonly employee use of original coloring and finishing materials and procedures. A true antique reproduction will have a proper 'antique' finish in appearance and process.
❓ What is an antique finish?
👉 What is an Antique Finish? An antique finish is a dark, aged look that is achieved by applying a dark stain or glaze to the surface of the wood. This finish is often used on furniture and cabinets to give them an old-world appearance.
❓ How do you add shine to tung oil finish?
👉 I rub thoroughly between coats with 0000 steel wool when looking for high gloss. I have done up to 8 coats on a piece. The last couple of coats may be thinned with mineral spirits. You could also wax polish on top of the tung oil to achieve the sheen you want.
❓ Should you sand between coats of tung oil?
👉 Tung Oil Re-coating – Sanding Between Coats Typical dry times are between 2 and 7 days before re-coating. You can test to see if the surface is ready to be re-coated by doing a light sanding in a small area with a 400-600 grit sandpaper. If the sanding produces a fine white dust you are good to go.
❓ How do I know if my wood finish is antique?
👉 Test the piece in an inconspicuous spot with denatured alcohol; if finish dissolves, it's shellac. If the piece is painted, test it with ammonia; very old pieces may be finished with milk paint, which can be removed only with ammonia.
❓ How can I tell what finish is on my antique furniture?
👉 Rub a small amount of linseed oil, using the cotton swab, into an inconspicuous spot on the furniture or trim. If the oil absorbs into the wood, the finish is likely oil. If it beads, the finish is shellac, polyurethane, lacquer or varnish.
❓ How do you apply an antique finish?
👉 0:151:23Fiebing's Antique Finish Paste How To Product Tutorial for LeathercraftYouTube
❓ Can Minwax antique oil finish be used over finished wood?
👉 Minwax Antique Oil Finish may be used over finished and unfinished wood Antique Oil Finish is recommended for interior wood surfaces such as cabinets, tables, paneling, doors and trim Works by penetrating the wood
❓ How do I use works by penetrating Minwax?
👉 Works by penetrating the wood May be used over wood stained with Minwax Wood Finish, or other Minwax wood stains, or applied directly to bare wood to enhance its beauty Protective finish that gives wood a soft, hand rubbed lustre
❓ How many oil based stain colors does Minwax have?
👉 Fast-Drying Formula. High Quality Results Layer and mix our 35+ oil-based stain colors to achieve custom looks with the high-quality finish you know and love. *Minwax’s #1 claim above is based on Epicor's Industry Data Analytics and third-party survey results for interior wood stains for the 12 month period ending 12/21.
❓ What is antique oil finish on wood?
👉 Minwax Antique Oil Finish is an oil-based protective finish that gives wood a soft, hand rubbed lustre. It is durable, easily maintanied and highly resistant to staining. Minwax 47000000 1.05 pounds